Serving dental offices nationwide

AT THE REPAIR BENCH

Our handpiece repair process

From the moment your handpiece arrives to the day we mail it back, we work through a careful process of testing, inspection, cleaning, repair, and final checks.

Warranty reviewTesting before & after repairCustomer portal updates

BEFORE & AFTER · FROM OUR REPAIR BENCH

A closer look at a KaVo 25LPA repair

This KaVo 25LPA received an idler gear replacement and internal cleaning. These photos show the gear assembly before and after service, along with the cleaning and disassembly work.

Professional-grade steam cleaning

We use a professional-grade steam cleaner to sanitize internal parts and break up residual bearing material.

Alcohol to dry and further clean

We then use alcohol to help dry the handpiece’s interior and further clean the internal parts.

KaVo 25LPA gear assembly before cleaning and idler gear replacement Before service
Gear assembly before serviceClose-up of the gear assembly with visible buildup around the gear.
KaVo 25LPA gear assembly after cleaning and idler gear replacement After service
After cleaning and idler gear replacementA closer view of the gear assembly following service.
See the cleaning and disassembly photos
Disassembled KaVo 25LPA head and shaft before cleaning Before cleaning
Head and shaft before cleaningThe disassembled parts as photographed before cleaning.
KaVo 25LPA head assembly after cleaning with the shaft removed After cleaning
Head after cleaningThe cleaned head assembly, shown with the shaft removed.
Inside the KaVo 25LPA head with visible buildup before cleaning Before cleaning
A look inside the headVisible buildup around the internal components with the cap removed.
Empty KaVo 25LPA head housing after disassembly and cleaning After cleaning
Cleaned head housingThe housing after disassembly and cleaning, with the internal assembly removed.
KaVo 25LPA opened head beside its removed cap and spring Disassembly detail
Head cap and spring removedAn additional view from this repair, showing the opened head and removed components.

Actual photos from one repair at Midsouth Handpiece Repair. Select any photo to view it in full.

Packing and repair steps

Here are the key steps your handpiece goes through at our repair bench.

  1. Receive & review

    We receive your handpiece, review the problems you noted, and check whether it is covered by warranty.

  2. Test the handpiece

    We test bur retention and handpiece operation to understand the reported issues and identify any problems.

  3. Inspect the parts

    If testing reveals a problem, we disassemble the handpiece and inspect it for broken or worn parts.

  4. Clean & repair

    We use a professional-grade steam cleaner to sanitize the internal parts and break up residual bearing material. We then use alcohol to help dry and further clean the handpiece’s interior, and complete the repair to address the identified problems.

  5. Test & confirm

    After the repair, we test handpiece operation again and confirm that the identified issues have been fixed.

  6. Document & return

    We create the invoice, update your customer portal with supporting repair information, and mail the handpiece back to your practice.

YOUR REPAIR INFORMATION

Keep track of your repair

We add supporting information about the completed repair to your customer portal. Sign in to view the status and notes we have recorded for your order.

Ready to send your handpiece?

Complete a work order with the problems you have noticed, then follow our packing and shipping instructions.

Send a handpiece